FX Crown/Dreamline/Maverick/Wildcat 3D Printed Spare Magazine


FX Crown/Dreamline/Maverick/Wildcat 3D Printed Spare Magazine

DM3D Designs High quality 3D printed FX Magazine for the FX Dreamline, Maverick, Crown and Wildcat MK3 air rifles.

Available in .177 (21 shot) and .22 (17 Shot)

Compatible with the following air rifles:

     FX Dreamline Series

     FX Maverick

     FX Crown

     FX Wildcat MK3

The magazine operates in a similar way to the original, first rotate the top lock to open, then remove the top plate. Next rotate the rotor to the last position and drop in a pellet, then proceed to fill the magazine. Replace the top plate and turn the top lock to secure the top plate.

The magazines have been extensively tested with JSB Heavy and JSB Jumbo pellets as these prove to be the smoothest loading and most accurate in FX barrels. It has also been tested with RWS Superdome, BSA Elite, Bisely Magnum as well as H&N Field Target Trophy, so they are not pellet fussy. They do not work with slugs taller than 9mm.

Every magazine is tested prior to shipping. Orders will normally ship the next working day, on rare occasions it could be up to 3 working days depending on stock levels.

Due to the materials used in the 3D printing process, do not leave the magazines in direct sunlight or extreme hot temperatures such as conservatories or the dashboard of a car for long periods of time or warping may occur.

All orders placed for this item will be passed on to DM3D Designs for completion, they will also ship the items you have ordered on our behalf.



You’ll earn 0 reward points with this purchase.

Be one of the first to know!

We’re sorry we’re out of stock but we can let you know as soon as it's available if you enter your email address below.