BSA Replacement Air Cylinder Tube - 325mm

This is a replacement 325mm air cylinder for all original BSA Scorpion single shot and T10 models. 

This item and can also be fitted to BSA Ultra SE, Ultra MMC, Goldstar SE models to give a larger air capacity as well as higher shot count. Please be aware fitting a longer air cylinder may also require an aftermarket shroud or a barrel extension as you may no longer be able to use a moderator. This can be used with the BSA Hornet Carbine models, however there is no internal machining for the original hornet regulator, but it can be used with an external aftermarket regulator with no issue.

Once fitted the fill pressure is still 232 bar, if your air rifle has been fitted with an after market regulator then you may be able to fill to 250 bar but please check before you purchase this item. 

The air cylinders are blued steel finish to match the original factory finished parts.

These replacement air cylinders can also be supplied with a quick fill unit that has a gauge, not only is this lighter and more reliable than the factory fitted quick fill, it is also fully serviceable and comes with a spare set of orings as well as a new fill probe.