The APEX Modular Airgun Tuning Regulator – An Introduction

The APEX Modular Airgun Tuning Regulator – An Introduction

The APEX Modular Airgun Tuning Regulator – An Introduction

The APEX Modular Regulator – An Introduction

We have developed a new modular regulator with the DIY user in mind, as well as additional DIY performance parts, to bring together correct rifle setup paired with regulator performance to give you easy access to unlocking your rifles full potential.

In 2010 we began installing different brands of airgun regulators into many different rifles, identifying and exploring all the areas of performance. Looking at shot count increases, ballistic gains, flattening trajectories, improving windage performance and overall field accuracy with great success, tailoring the rifles to give more benefits than simply increased shot count.

An APEX Regulator in a Housing

The APEX Modular Regulator has been designed and built around several principles:

Ultimate Performance - In testing, our design has proven more consistent and more efficient than any other OEM or aftermarket regulator in like for like comparison, to give the most stable and reliable performance for even the most demanding airgun shooter.


Easy Tuning
- The most flexible regulator design to date, with high resolution adjustment from 20-190 bar, for accurate pressure setting as well as regulator refill adjustment, giving stable and reliable performance tailored to your needs. Higher pressures can be made to specification.

Easy Servicing - The modular design is fully serviceable in seconds without specialist tools, featuring large section orings for longer service intervals and greater reliability.

The APEX Regulator can be removed from the model/brand specific body case adapter in seconds without adjusting the regulator settings, allowing a full service with no specialist tools required. For accurate pressure testing and setting there is an APEX Regulator Test unit available that the APEX Regulator core fits into, for those of you wanting to tune/set your regulator pressures off the rifle.



Contamination Protection- One of the biggest issues we see in other regulators is contamination, the APEX regulator has been designed to fully protect the regulator sealing face from contamination, a leading cause of performance issues in other regulators.

The APEX Regulators are all hand built and cleaned several times before, during and after assembly to give reliable performance.

The Mechanical Advantage – The mechanics of the spring stack are used to give optimized regulator performance, giving better consistency and efficient air use.

The APEX Regulator springs can be set up in several different ways, impacting on the performance you are looking to achieve from your rifle. Giving a high-resolution pressure setting range for output pressure, allowing fine tuning as well as sensitivity, giving reliability and performance.

a few different stacks, to cover a wide range of pressure adjustments and adjustment resolutions to tailor the performance to your airgun.


For example:

A 50 bar setting in a 6Ft/lbs target pistol with a 10% loss firing cycle gives minimal residual pressure drop on firing and requires a very sensitive regulator, capable of detecting and cycling quickly at low pressure drop of a only a few bars.

However,

A high-pressure output of 150bar in a high-power rifle with a large plenum and a 70% loss firing cycle requires a regulator that is mechanically stable though a very wide pressure range, with a quick response time, a repeatable output pressure and isn’t sensitive to mechanical degradation causing unreliable refill pressures.

The APEX Regulator can be setup to your needs and will give advantages in shot count, accuracy and overall air efficiency, as well as increased mechanical stability that will give greater reliability and performance in every situation.